Frame: Milano Superleggero 3V (this is a genuine Italian product made in Alberto Masi's workshop in Milano, Italy. This frame was built in approx. 2010. CyclingUpgrades acquired this frame from the original owner who rode it on a limited basis as it was part of a large collection)
Rider weight limit: 165 lbs suggested by manufacturer.
Serial: 901 94
Material: Dedacciai Aluminio U2
Color: Green, white, and red.
Brake type: Center-Mount rim brake.
Size: Stamped with XM 55 under the bottom bracket. Actual measurements taken by hand are approximate and are as follows: 575mm stack, 378mm reach, 815mm standover height, 560mm effective top tube. 560mm actual top tube center to center. 545mm center of bottom bracket to center of top tube. 575mm center of bottom bracket to top of seat tube. Head tube 164mm. 410mm chainstay length. If other measurements or take-offs are needed, please feel free to ask. We have included in our last picture a photo of the frame with a wheelset on it to show the head and seat tube angles and top tube slope.
Condition: This frame is in great condition with light signs of use. No cracks or carbon defects were identified through a thorough visual inspection. The cosmetic imperfections to highlight include: some marks on the seat tube where a front derailleur clamp was and a small paint chip on the lower right side of the down tube - see pic #11. We have attempted to show all noticeable imperfections in specific close-up pictures, however other minor imperfections and light signs of use may exist.
Groupset compatibility: Frame can be setup for eTap or mechanical groupsets. This frame is not compatible with Di2, or EPS setups. Mechanical cable guide below the bottom bracket intact.
Bottom bracket: Italian threaded bottom bracket shell type. No bottom bracket currently installed. We have a handful of lightly used basic bottom brackets on hand, let us know what you need and we can try to ship the frame with the right bottom bracket installed. Additionally, CyclingUpgrades is a Wheels Manufacturing, and a Ceramicspeed Authorized Dealer, if you prefer to have the frame setup with a certain Wheels Manufacturing, or Ceramicspeed bottom bracket we can add and install it at an additional cost before shipping - message with inquiries/requests.
Steerer length: 75mm of steerer above the top tube.
Seatpost: 27.2mm diameter. No seatpost included.
Dropout Spacing: QR x 100mm front, QR x 130mm rear.
Weight: 1636 grams as pictured with frame hardware, etc.
What's included: Frame, fork.
At CyclingUpgrades, we fulfill all orders next business day or sooner. Generally we are able to fulfill orders placed by 12pm MT on the same day, however it is not guaranteed. We ship all items via USPS except for frames/wheels which ship via UPS or Fedex. Please check our other listings for additional cycling upgrades and thank you for shopping our store!
